Avaya J100 Series Installing And Administering page 328

Customizable parameters
Parameter name
CONFERENCE_FACTORY_URI
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
environment
Description
appearance is
unavailable, then the
setup will use idle
bridged call appearance.
If a bridged call
appearance initiates the
setup, then setup will
use idle bridged call
appearance of either the
same extension or
different extension.
AUTO_SELECT_ANY_I
DLE_APPR is ignored.
Note:
Avaya J129 IP Phone
does not support this
feature.
Specifies the URI for
conference for Network
Conferencing in an Open
SIP environment.
Valid values contain zero
or one URI, where a URI
consists of a dial string
followed by @, and then
the domain name, which
must match the routing
pattern configured in
System Manager for
Adhoc Conferencing.
Depending on the dial
plan, the dial string can
need a prefix code, such
as a 9 to get an outside
line. The domain portion of
the URI can be in the form
of an IP address or an
FQDN.
The value can contain 0 to
255 characters. The
default value is null.
Table continues...
328