Avaya J100 Series Installing And Administering page 357

Parameter name
ENABLE_MODIFY_CONTACTS
ENABLE_MULTIPLE_CONTACT_WARNING
ENABLE_OOD_MSG_TLS_ONLY
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
1
1
1
environment
List of configuration parameters
Description
Specifies if the list of
contacts and the function
of the contacts application
can be modified on the
phone.
Value operation:
• 0: No
• 1: Yes
Specifies if a warning
message must be
displayed if there are
multiple phones registered
on a user's behalf.
Value operation:
• 0: No
• 1: Yes
Note:
Multiple registered
phones can lead to
service disruption.
Specifies if an Out-Of-
Dialog (OOD) REFER
must be received over
TLS transport to be
accepted.
Value operation:
• 0: No, TLS is not
required.
• 1: Yes, TLS is required.
Note:
A value of 0 is only
intended for testing
purposes.
Table continues...
357