Avaya J100 Series Installing And Administering page 146

Phone configuration
Name
Enable Local Dialing Rules
Country Code
International Access Code
Long Distance Access Code
Internal Extension Number Length
National Telephone Number Length
Outside Line Access Code
Remove PSTN access prefix from
outgoing number
Admin
April 2020
Description
Specifies whether the algorithm defined by parameters in this
section is used during certain dialing procedures.
The options are:
• Disable
• Enable without Contacts (default)
• Enable with Contacts
Specifies the country code of the phone.
The valid value is an integer from 1 to 999. The default value is
1.
Specifies the international access code.
The valid value is up to 4 dialable characters. The default value
is 011.
Value format: digits from 0 to 9, *, #.
Specifies the long distance access code.
The valid value range is a sting of integers from 0 to 9, and
empty. The default value is 1.
Specifies the length of an internal extension number.
The valid value is an integer from 3 to 13. The default value is
5.
Specifies the length of a national phone number.
The valid value is an integer from 5 to 15. The default value is
10.
Specifies the number for making an outside call, i.e. a local call
in a public network.
The valid value is up to 2 dialable characters. The default value
is 9.
Value format: digits from 0 to 9, *, #.
Allows dialing digits during failover and removing of the PSTN
access prefix from the outgoing number.
The options are:
• No (default)
• Yes
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
environment
Table continues...
146