Avaya J100 Series Installing And Administering page 454

Customizable parameters
Parameter name
SLMCAP
SLMCTRL
SLMPERF
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
0
1
environment
Description
Specifies if the SLA
Monitor agent is enabled
for packet capture.
Value operation:
• 0: Disabled (default)
• 1: Enabled and payloads
are removed from RTP
packets
• 2: Enabled and payloads
are included in RTP
packets
• 3: Controlled from admin
menu - Allows you to
enable or disable of RTP
packets capture using
local admin procedures.
Specifies whether the SLA
Monitor agent is enabled
for phone control.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Controlled from admin
menu.
Specifies whether the SLA
Monitor agent is enabled
for phone performance
monitoring.
Value operation:
0: Disabled (default)
1: Enabled
Table continues...
454