Avaya J100 Series Installing And Administering page 361

Parameter name
ENABLE_SHOW_EMERG_SK
ENABLE_SHOW_EMERG_SK_UNREG
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
2
2
environment
List of configuration parameters
Description
Specifies if Emergency
soft key, with or without a
confirmation screen, is
displayed when the phone
is registered.
Note:
Emergency calls are
not supported in an
Open SIP
environment.
Value operation:
• 0: Emergency soft key
is not displayed.
• 1: Emergency soft key
is displayed without a
confirmation screen.
• 2: Emergency soft key
is displayed with a
confirmation screen.
Specifies if an Emergency
soft key, with or without a
confirmation screen, is
displayed when the phone
is not registered.
All emergency numbers
will always be supported.
Value operation:
• 0: Emergency soft key
is not displayed.
• 1: Emergency soft key
is displayed without a
confirmation screen.
• 2: Emergency soft key
is displayed with a
confirmation screen.
Table continues...
361