Avaya J100 Series Installing And Administering page 36

Initial setup and connectivity
• File named release.xml that is used by the Avaya Software Update Manager application.
Avaya Software Update Manager upgrades and maintains firmware for Avaya managed
devices.
Note:
You can configure Open SIP root certificates by using the TRUSTCERTS parameter in the
46xxsettings.txt file. The supported file format is .pem.
Modifying the settings file
About this task
Use this procedure to modify the 46xxsettings.txt file to provision the phone configuration
parameters. The parameter values stored for the users of a particular phone model do not apply to
other phone models, even if the corresponding SIP user is the same.
Procedure
1. On the file server, go to the directory of the 46xxsettings.txt file.
2. Open the 46xxsettings.txt file in a text editor.
3. Set the values of the parameters that you want to provision.
4. Save the 46xxsettings.txt file.
Result
On the next poll, the phones download the 46xxsettings.txt file and apply the configuration
settings.
Installation checklist
Use this checklist to gather, record, and verify the information during the installation.
No. Task
1 Check the prerequisites.
2 Administer VLAN.
3 Configure the servers.
4 Download and save the software package.
5 Configure the Settings file.
6 Configure the Upgrade file.
7 Install the phone.
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Reference
Prerequisites
VLAN overview
Provisioning server
configuration
Downloading and saving the
software on page 35
Configuration parameters
page 292
Device upgrade process
page 286
Installing the phone
environment
on page 33
on page 65
on page 30
on
on
on page 37
36