Avaya J100 Series Installing And Administering page 120

Phone configuration
Name
Enable PPM as source of
Proxy Server
Proxy Policy
SIP Proxy Server
SIP Proxy Server
(Automatic)
Register to Proxy Server
Number of Line
Appearances
Number of proxy server to
register simultaneously
April 2020
Description
Specifies whether PPM is used as a source of SIP proxy server
information.
Note:
This is an Avaya Aura
environment.
The options are:
• Yes (default)
• No
Specifies whether SIP proxy servers are read-only or can be edited.
The options are:
• Manual (Use Phone Admin Menu or WEB to configure): To configure
SIP proxy server manually by using the phone or the web interface.
• Automatic (Can be set from DHCP, LLDP, Settings File, PPM)
(default): To use the SIP proxy server settings received from the
46xxsettings.txt file .
Specifies the SIP proxy server domain.
The valid value is a string of 0 to 255 ASCII characters, for example:
148.147.158.185:5061;transport=tls,alphagreensm01.avaya
.com:5061;transport=tls
Note:
To use TLS signaling, set the ENFORCE_SIPS_URI parameter to 0.
Specifies the SIP proxy server settings as received from the
46xxsettings.txt file .
Specifies whether the phone registers simultaneously to a proxy server.
The options are:
• Simultaneous (default)
• Alternate
Specifies the number of line appearances that the phone will display. For
each displayed line appearance there is a specific line appearance index.
The options range from 1 to 10 line appearances. The default value is 3 .
Specifies the number of SIP proxy controllers that the phone can register
simultaneously.
The options are:
• 1
• 2
• 3 (default)
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
®
setting which is ignored in an Open SIP
environment
Table continues...
120