Avaya J100 Series Installing And Administering page 410

Customizable parameters
Parameter name
PNP_ENABLED
PRESERVE_MEDIA_CONNECTIONS
PRESERVED_CALL_DURATION
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
1
0
120
environment
Description
Specifies if PnP is enabled
or not. This value does not
define if it is to be
activated or not but only
defines if PnP can be
activated. Typically this is
used only to block PnP
from occurring on new and
reset to default phones.
Value operation:
• 0: PNP is blocked
(default).
• 1: PNP is allowed.
Specifies whether to
preserver media
connections for the
servers that do not comply
with RFC 3264 8.2.
Value operation:
• 0: Do not preserve
media connections.
• 1: Preserver media
connections.
Specifies the time interval
in minutes if
ENABLE_IPOFFICE is set
to 2 and if
MEDIA_PRESERVATION
is set to 1.
The time interval can be
from 10 minutes to 120
minutes.
Table continues...
410