Avaya J100 Series Installing And Administering page 215

Call Forwarding configuration
Use the 46xxsettings.txt file to set the following parameters:
Parameter name
CALLFWDADDR
CALLFWDDELAY
CALLFWDSTAT
April 2020
Default value
—
—
0
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Sets the address to which the
calls are forwarded.
Users can change or replace this
administered value if
CALLFWDSTAT is not 0.
Sets the number of ring cycles
before the call is forwarded to the
forward or coverage address. The
default delay is one ring cycle.
Sets the call forwarding mode of
the phone by totaling? the
following values:
• 0: Disables call forwarding.
• 1: Permits unconditional call
forwarding.
• 2: Permits call forward on busy.
• 4: Permits call forward/no
answer.
Example: If you set a value of 6,
the phone enables call forwarding
on a busy tone and on no answer.
environment
Feature configuration
Note:
This parameter is supported
when failed over from Aura
SM to a non-Aura survivable
server, excluding BSM.
Note:
This parameter is supported
when failed over from Aura
SM to a non-Aura survivable
server (excluding BSM).
Table continues...
215