Avaya J100 Series Installing And Administering page 306

Customizable parameters
Parameter name
BLF_INCOMING_CALL_INDICATION
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
3
environment
Description
Specifies the indication
type for a BLF incoming
call.
Valid values:
• 0 - None (no alerting for
BLF incoming calls).
• 1 - Audible (only audible
alerting for BLF
incoming calls).
• 2 - Visual (only visual
alerting for BLF
incoming calls).
• 3 - Default (the behavior
isl based on
BLF_INCOMING_CALL
_INDICATION_MODE
parameter value).
• 4 - Both (both audible
and visual alerting for
BLF incoming calls).
Note:
This parameter is
supported only in the
3PCC environment.
Avaya J129 IP Phone
does not support this
feature.
Table continues...
306