Avaya J100 Series Installing And Administering page 346

Customizable parameters
Parameter name
DOWNLOADABLE_DIRECTORY
DOT1X
DOT1XEAPS
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
0
MD5
environment
Description
Specifies the file name of
the contacts directory.
The value can contain 0 to
32 ASCII characters.
Important:
The file name must
be in .xml format.
Specifies the 802.1X pass-
through operating mode.
Pass-through is the
forwarding of EAPOL
frames between the phone
Ethernet line interface and
its secondary (PC)
Ethernet interface
Value operation:
• 0: EAPOL multicast
pass-through enabled
without proxy logoff.
• 1: EAPOL multicast
pass-through enabled
with proxy logoff.
• 2: EAPOL multicast
pass-through disabled.
Specifies the
authentication method to
be used by 802.1X.
Valid values are MD5, and
TLS.
Table continues...
346