Maintenance strategy
Media processor (DEFINITY ONE)
Administration and maintenance
Before the LAN interface on the TN2314 processor card can be used, the Processor Ethernet?
field must be enabled in the License File for this system. Display the System-Parameters Customer-
Options form (
display system-parameters customer-options
enabled (set to y).
The
,
status
busy
For more information on the
Commands Reference (555-245-101) and
Figure 1: Processor interface status
Media processor (DEFINITY ONE)
The MedPro board is the TN802B version of the MAPD circuit pack, when operating as a media
processor. See
MEDPROPT (TN802/TN2302 MED PRO DSP PORT)
(555-245-102).
26
, and
commands are available for the Processor Ethernet interface.
release-from-busy
status
command see
Figure 1, Processor interface status,
), page 4, to check that this field is
status processor-ip-interface
in Maintenance Alarms Reference
Maintenance Procedures
in Maintenance
on page 26.
December 2003