Critical Reliability Configuration; S8100 Media Server Components And Functionality; Tn2314 Processor Circuit Pack - Avaya MCC1 Maintenance Procedures

Figure notes
6 Services interface: default Ethernet 1. The
server's dedicated Ethernet connection to
a laptop. This link is active only during on-
site administration or maintenance.
7 Network control A interface: default
Ethernet 0. The server's Ethernet
connection to 1 or 2 Ethernet switches.
This private LAN carries the control
signals for the S8700 Multi-Connect PNs
when possible. Control network A is
considered the primary control network
because it connects to the primary IPSI
board in a PN.

Critical Reliability configuration

Critical-reliability systems include all of the features and components of the high-reliability configuration
described above, but it also has a duplicated bearer network. This configuration requires that not only the
IPSI-connected port networks have duplicated IPSIs, but the non-IPSI-connected port networks must
have duplicated Tone-Clock boards. Also duplicated in this configuration are the expansion interface
(TN570) and the switch node interface (TN573).
S8100 Media Server
components and functionality
•

TN2314 processor circuit pack

• Virtual boards and devices
• Windows 2000 platform
• GUI operation
• Backup procedures
• Access Security Gateway
TN2314 Processor circuit pack
The TN2314 processor provides:
• An on-board Pentium III processor chip that runs Windows 2000
• A Motorola processor running application firmware
• A Windows 2000-to-firmware interface
• A tone clock
Maintenance Procedures
December 2003
on page 113
on page 108
on page 108
on page 109
on page 109
on page 111
Hardware configurations

S8100 Media Server components and functionality

13 Bearer network
107