Avaya MCC1 Maintenance Procedures page 136

Hide thumbs Also See for MCC1:
Table of Contents

Advertisement

Server initialization, recovery, and resets
Link Recovery
2
In the H.248 MEDIA GATEWAY section type a number (1-30; default is 5) in the Link Loss
Delay Timer (minutes) field. This is the number of minutes that Communication
Manager retains the gateway's call state information.
NOTE:
The value of this timer should be longer than either of the gateway timers (see
Administering the gateway timers and Transition Point
3
Press
Enter
Figure 18: System-parameters ip-options form
display system-parameters ip-options
IP MEDIA PACKET PERFORMANCE THRESHOLDS
Roundtrip Propagation Delay (ms)
Number of Pings Per Measurement Interval: 10
RTCP MONITOR SERVER
IP DTMF TRANSMISSION MODE
Intra-System IP DTMF Transmission Mode: in-band-g711
Inter-System IP DTMF: See Signaling Group Forms
H.248 MEDIA GATEWAY
Administering the Media Gateway
Administering the Media Gateway requires you to administer the Primary Search Timer, the Total Search
Timer, and the MGC list Transition Point. You also administer an MGC list of up to four alternate
controllers for the gateway.
Administering the gateway timers and Transition Point
To administer the gateway timers and Transition Point
1
Administer the gateway's Primary Search Timer (the length of time that the gateway spends
trying to connect to the primary server) by typing set mgp reset-times primary-search <search-
time> at the Command Line Interface (CLI). The <search-time> values are 1-60 minutes.
NOTE:
The Primary Search Timer value should be shorter than both the Total Search Timer and
the Link Loss Delay Timer.
2
Administer the Total Search Timer (the length of time that the gateway spends trying to connect
to all alternate resources) by typing set mgp reset-times total-search <search-time> at the
Command Line Interface (CLI). The <search-time> values are 1-60 minutes.
136
to save the change.
IP-OPTIONS SYSTEM PARAMETERS
Packet Loss (%)
Ping Test Interval (sec): 10
Default Server IP Address: 192.168.1
Default Server Port: 5005
Default RTCP Report Period(secs): 5
Link Loss Delay Timer (Minutes): 5
on page 136).
High: 30
Low: 20
High: 10
Low: 5
.12
Maintenance Procedures
December 2003

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scc1Cmc1G600G650G350G700

Table of Contents