Replacing The G700 Media Gateway; Replacing The S8300 Media Server Or Hard Drive - Avaya MCC1 Maintenance Procedures

Component replacement
S8300 and G700 component maintenance
Table 71: Avaya Cajun equipment
Avaya Cajun Equipment
Material code: 108562950
Material code: 108659178
Material code: 108659194
Material code: 108659186

Replacing the G700 Media Gateway

Circumstances may require that the G700 Media Gateway be replaced, either because of
hardware/firmware failure, or because of newer technology. Depending upon these circumstances, some
or all of the components inserted into the G700 (S8300 Media Server, LED Panel, Avaya Expansion
Module, Avaya Octaplane Module, or various Media Modules) can be reused in the replacement G700.
NOTE:
The procedures to replace an installed G700 Media Gateway with a new G700 are
described in Job Aid: Replacing the G700 Media Gateway, 555-245-752. The G700 may
or may not contain an S8300 Media Server, which can be configured as a primary
controller or as a local survivable processor (LSP).
Replacing the S8300 Media Server or hard
drive
Circumstances may require that the S8300 Media Server or its hard drive be replaced, either because of
hardware/firmware failure, or because of newer technology.
NOTE:
The term "S8300 hardware" is used to refer to either the S8300 Media Server circuit pack,
including its hard drive, or to just the S8300 hard drive.
290
CAJUN MOD P330 100FX
UPLINK 2PT
CAJUN P330 MOD EXP
GBIC 2PT
CAJUN MOD DUAL SPD
OC12/0C3 SMF 15KM
CAJUN MOD DUAL
SPEED OC12 OC3 MMF
500M
The X330-F2 adds two
100Base-FX ports which can
be aggregated using LAG to
provide a 200 Mbps link for
backbone or high-speed
server applications.
The X330-G2 provides GBIC
connectivity with an adapter
for standard GBIC
transceivers.
(2 of 2)
Maintenance Procedures
December 2003