Configuring Oamp To Use Linux Account Credentials On The Avaya Aura Web Gateway Administration Portal - Avaya Aura Deployment Manual

Configuring OAMP to use Linux account credentials on the Avaya Aura
Configuring OAMP to use Linux account credentials on
the Avaya Aura
About this task
This is an optional procedure that you need to perform if you want to log on to the Avaya Aura
Web Gateway administration portal using Linux account credentials.
Procedure
1. Open the Linux shell using your Linux administrator account credentials.
2. Run the following command:
cdto active
sudo vi tomcat/<tomcatVersion>/conf/catalina.properties
3. Locate the com.avaya.cas.access.groups properties and update the list of groups
allowed to access the web administration portal as required.
Ensure that entries in the group list are separated by a comma. The following is an
example:
# OAMP access linux groups
com.avaya.cas.access.groups.admin=admingrp
com.avaya.cas.access.groups.securityadmin=admingrp
Users that are part of the "admingrp " group have access to the web administration portal
by default.
4. Run the following command to apply the changes:
svc tomcat restart
October 2018
®
Web Gateway administration portal
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
®
Web Gateway administration portal
®
Web Gateway
®
95