Avaya MCC1 Maintenance Procedures page 67

3 Select Dial-up to private network on the Network Connection Type screen.
NOTE:
If your system has more than one modem, you may be requested to select the device. If so,
select the modem you are using to dial out.
In the Phone number field, enter the appropriate telephone number inserting special digits such
4
as 9 and 1 or *70, if necessary.
On the Connection Availability screen, click For all users or Only for myself , as appropriate.
5
6 On the Completing the Network Connection Wizard screen, type the name you want to use for
this connection. This name will appear in the Network and Dial-up Connections list.
Check the Add a shortcut to my desktop , if desired, and click Finish .
7
If a Connect screen appears, click Cancel .
8
Configure remote PC for PPP modem
connection (Windows 2000
or XP, Terminal Emulator, or ASA)
To configure the remote PC for PPP modem connection
On your PC's desktop, right-click My Network Places and click Properties .
1
The system displays the Network and Dial-up Connections window.
2 Double-click the connection name you made in
Media Server (Windows 2000 or XP)
NOTE:
Depending on your system, the Connect window may appear. If so, click Properties .
Click the Security tab.
3
4 Select the Advanced (custom settings) radio button.
5 Check the Show terminal window checkbox.
6 Click the Networking tab.
7 In the Components box, verify that Internet Protocol (TCP/IP) and Client for Microsoft Networks
are both checked.
8 Select Internet Protocol (TCP/IP) and click Properties .
9 Click the Advanced button.
10 Uncheck (clear) the Use default gateway on remote network box.
Click OK three times to exit and save the changes.
11
Use Windows for PPP modem connection
(Windows 2000 or XP)
NOTE:
Access to the system through a PPP modem connection may require RAS access and ASG
Mobile access.
Maintenance Procedures
December 2003
Use Windows for modem connection to the
on page 66.
Access and login procedures
Laptop settings and connections
67