Avaya MCC1 Maintenance Procedures page 406

Additional maintenance procedures
Automatic Transmission Measurement System
Figure 122: ATMS detail report
Group: 78
THRESHOLD VALUES
Trk Test
Mem Date
1 10/04 14:25 pass 7
2 10/04 14:26 1920
3 10/04 14:27 1000
4 10/04 14:28 pass 7
5 10/04 14:29 pass 7
6 10/04 14:30 pass 7
7 10/04 14:31 pass 7
8 10/04 14:32 pass 6
9 10/04 14:33 pass 6
10 10/04 14:34 pass 6
Output fields—ATMS detail report
Measurements are made in both directions, near to far end, and far to near end. For each measurement,
there are two columns on the lower part of the report, "NE" for near end, and "FE" for far end. These
refer to the destination end for that measurement.
Field
Group
Type
Vendor
TTL Type
Threshold
Values
Trk Mem
Test Date
Test Time
406
ATMS TRUNK MEASUREMENTS
Type: co Vendor: AT&T
1004Hz-loss
Min Max
Marginal -2 21
Unacceptable -2 21
Test Test -16dBm OdBm
Time Rslt FE NE FE NE
7 7
7 7
7 7
7 7
7 7
6 6
6 7
6 7
Description
The trunk-group number selected
The trunk-group type
The vendor of this trunk group
The type of terminating test line on the switch at the far end of the
trunk to which the test call was made
The list of marginal and unacceptable threshold values for each type
of measurement as defined on the Trunk Group screen
The trunk-group member number
The month and day this trunk was last tested
The time of day this trunk was last tested
TTL Type: 105-w-rl
Loss dev at
404Hz 2804Hz C-msg C-ntch
- + - + Noise Noise
9 9 9 9 55
9 9 9 9 55
FE NE FE NE FE NE FE NE
7 -2 -2 7 7 15 28 34 34
7 -2 -2 7 7 15 29 38 34
7 -2 -2 6 6 15 35 34 34
7 -2 -2 6 6 15 26 34 34
7 -2 -2 7 7 15 30 34 34
6 -2 -2 6 6 15 25 34 34
7 -1 -1 7 7 15 25 34 34
6 -1 -1 7 7 15 36 34 35
SRL SRL
LO HI ERL
74 0 0 0
74 0 0 0
FE NE FE NE FE NE
8 16 11 16 11 17
8 16 11 15 11 16
8 6 9 6 10 7
8 16 9 13 10 16
8 16 9 11 10 13
10 17 11 16 12 17
8 15 9 13 10 16
8 6 9 6 10 7
(1 of 2)
Maintenance Procedures
December 2003