Component replacement
S8100 component maintenance
Figure 82: S8100 fan/filter removal
Removing or replacing the S8100 fan
assembly
1
Pull (unplug) the fan assembly from the chassis using the thumb/finger notch provided. The
power for the fan automatically disconnects when the assembly is unplugged.
2
Plug in the new fan assembly. The power for the fan automatically connects when the fan
assembly is plugged in.
3
Replace the fan/filter access panel and the left door.
Removing or replacing the S8100 fan filter
1
Remove the fan access panel from the left side of the cabinet.
2
Pull the fan filter from the chassis.
3
Clean (vacuum or wash with water) or replace the filter as needed and slide the filter back into the
chassis.
4
Replace the fan access panel.
286
Filter
Fan
scdmfltr RPY 072297
Maintenance Procedures
December 2003