Avaya MCC1 Maintenance Procedures page 324

Figure 98: Replacing the faceplate
Figure notes
1 Screws holding faceplate
2 Faceplate on NIC shipped from
factory
Inserting the new NIC
1 Carefully grasp the new NIC by the top edge or upper corners and align it with the PCI-2
expansion slot. Press the NIC firmly into the expansion slot.
!
Ensure that the NIC is completely and correctly seated in the PCI-2 expansion slot of the S8500
Media Server. Incomplete insertion might cause damage to the system board or the NIC .
2 Position the faceplate so that it fits in the PCI-2 slot using the captive screw to hold it in place.
324
1
2
WARNING:
3
3 Smaller faceplate
h3msfnic LAO 072103
Maintenance Procedures
December 2003