Avaya MCC1 Maintenance Procedures page 104

Hardware configurations
Basic server and IPSI connections
Figure 13: S8700 IP Connect duplex reliability
7
1
IPSI
Figure notes
1 S8700 Media Server 1
2 S8700 Media Server 2
3 Duplication interface – the Ethernet
connection between the two S8700 media
servers
4 Services interface – dedicated Ethernet
connection to a laptop. This link is active
only during on-site administration or
maintenance and the services interface can
link to the non-active server through a
Telnet session.
5 Connection from the servers to the
Ethernet switch.
104
4
1
Ethernet 1
Ethernet 0
5
1
1
13
IPSI
9 9
100bT BBI
LINK LINK
TRMT TRMT
RCV RCV
8
PN 1
1 2
3
2
Ethernet 2
6
12
CONSOLE
24
7
2
10
IPSI
9
100bT BBI
LINK LINK
TRMT TRMT
RCV RCV
8
PN 2
6 Ethernet switch – A device that provides for
port multiplication by having more than one
network segment. In an IP Connect
environment, the Ethernet switch should
support 802.1 IP/Q, VLAN, and 10/100
Mbps.
7 Uninterruptible power supply (two required)
8 Port network – optional configuration of
media gateways that provides increased
switch capacity
9 IPSI – provides transport of CCMS
messages over IP allowing the S8700 media
server to communicate with the port
networks.
10 Customer LAN
4
Ethernet 1
100bT BBI
LINK LINK
TRMT TRMT
RCV RCV
8 PN
Maintenance Procedures
December 2003