Avaya MCC1 Maintenance Procedures page 194

Troubleshooting
Troubleshooting ATM
Figure 50: A500:show signaling cause 31
4 At the S8700 Multi-Connect SAT type display errors, and press
Set the Error List to errors and Category to PNC on the input screen
Multi-Connect display errors input screen,
codes (see following
network to a TN230X on the PPN (and to a TN230X in a PN). This is successful only if the links
between the PPN and the PN remain up so that the message from the PN is logged.
Refer to
MO.
Figure 51: S8700 Multi-Connect display errors input screen
display errors
Figure 52, Screen output for display errors command,
display errors command.
194
A500:show signaling cause 31
Cause 31: Normal, unspecified
Table 62, Observed cause codes,
ATM-BCH (ATM B-Channel Trunk)
The following options control which errors will be displayed.
ERROR TYPES
Error Type:
REPORT PERIOD
Interval: a
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Port Network:
Board Number:
Trunk ( group/member ):
Enter
on page 194), and press
on page 195) returned from the ATM
for detailed information about cause codes for this
ERROR REPORT
Error List:
From: / / : To:
Cabinet:
Port:
Category: PNC
Extension:
/
on page 195 shows the screen output for the
.
(Figure 51, S8700
to display any cause
Enter
Page 1 of 1 SPE A
errors
/ / :
Maintenance Procedures
December 2003