S8100 Fan/Filter Removal/Replacement - Avaya MCC1 Maintenance Procedures

13 Type telnet name in the dialog box.
14 In the Enter you login name dialog box, type lucent1, lucent2, or lucent3, and click OK.
15 In the Enter password dialog box, type the appropriate password for the login used, and click
OK.
A LAC prompt displays (LAC>).
16 Type bash
The bash window displays a prompt such as name-lucent1>.
17 Type swversion
Verify that the load of software on the hard drive matches that on the customer's CD. If it does not
match, follow the Update Software procedure in Installation and Upgrades for the Avaya S8100
Media Server with the Avaya G600 and CMC1 Media Gateways, 555-233-146.
18 Bring up Internet Explorer on the laptop and load the S8100 Home Page. Navigate the browser
to the backup and restore screens.
The browser prompts for a login and password, because the new hard disk does not have a
password file. The system reverts back to the factory default login of lucent3, with lucent3 as
the password.
19 Follow the steps for restoring the customer's data.
NOTE:
The customer may have backed up to their local network or the PCMCIA flash disk.
20 After restoring, follow the procedures to install License and Authentication files, including
running the
on page 92.
After installing the License and Authentication files, the system restarts and all applications load.
Note that the Windows 2000 logins of vm, sa, browse, and Ntadmin will be reset to their
21
factory defaults. Tell the customer to reset these passwords and re-install any other Windows 2000
accounts they may have created.
NOTE:
The Communication Manager-specific customer logins should still work as they were
restored with the restore done earlier.
22 If it is necessary, upgrade the software on the disk. If you are upgrading to a new release, the
upgrade requires installing new License and Authentication files.

S8100 fan/filter removal/replacement

1 Remove the left door.
2 Remove the fan/filter access panel as shown in
Maintenance Procedures
December 2003
loadlicense command. For more details,
Component replacement
S8100 component maintenance
Installing License and Authentication Files
Figure 82, S8100 fan/filter removal, on page 286.
285