S8700 Component Maintenance; Replacing The S8700 Media Server - Avaya MCC1 Maintenance Procedures

Hide thumbs Also See for MCC1:
Table of Contents

Advertisement

S8700 component maintenance

This section contain information about:

Replacing the S8700 Media Server

Replacing the S8700 hard drive
Replacing the S8700 Media Server
You might need to replace an Avaya S8700 Media Server to correct a problem, such as a functional
failure of the motherboard, the hard drive, or other components. Depending on which software release
that the failed media server is running, you might need to upgrade the software on the replacement media
server and, perhaps, the existing media server.
Upgrade requirements
A software upgrade might be required when replacing an S8700 Media Server.
checklist,
on page 329 describes when an upgrade is required.
Table 74: Upgrade checklist
Software release before
Media Server failure
Release 1.0, 1.1.x
(R011x.01.xxx.x)
Release 1.2.x
(R011x.02.xxx.x)
Release 1.3.x
(R011x.03.xxx.x)
Required equipment
Verify that you have the following equipment and tools on site:
Replacement S8700 Media Server
CD-ROM(s) with appropriate software load(s) — R1.2 (1.0/1.1 replacement or for R1.0/1.1
LSPs) and/or R1.3 (R1.3 replacement)
Ethernet crossover cable for direct connection of your laptop to the media servers
Cross-point (Phillips) screwdrivers (#1 and #2)
Maintenance Procedures
December 2003
on page 329
on page 342
Upgrade requirement
If used, upgrade all LSPs to Release 1.2 software. Because the
replacement media server comes with Release 1.2 software, you
need to upgrade the existing media server to Release 1.2
software.
No upgrade is required because the replacement media server
contains R1.2 software. However, a software patch, if necessary,
must be installed.
Because the replacement media server contains R1.2 software,
the software must be upgraded to R1.3. You must also install the
same patch(es) as that on the existing media server. Neither the
existing media server nor the LSPs need to be upgraded because
they already have Release 1.3 software.
S8700 component maintenance
Table 74, Upgrade
329

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scc1Cmc1G600G650G350G700

Table of Contents