Login Methods - Avaya MCC1 Maintenance Procedures

Table 32: w2ktt terminal emulation function keys
Key Sequence
ESC x
ESC
ESC e
ESC
ESC h
ESC
ESC n
ESC p

Login methods

This section describes how to log on to the S8300 Media Server using Telnet or the built-in Web Interface
and how to start a SAT session. These procedures assume that:
• You have a crossover cable directly connected from you laptop to the Services port on the Media
Server and your laptop is configured for a direct connection
or
• You are connected to the S8300 Media Server over the customer's LAN, either remotely or on
site. In this case, your laptop must be configured to connect to the customer's LAN and you
would use the LAN IP address of the S8300 instead of 192.11.13.6.
The procedures in this section include:
• Logging in using a telnet session on your laptop
• Logging in to the S8300 Web interface from your laptop
• Logging in to Communication Manager (SAT screens)
• Logging in to the Layer-2 switching processor
The last procedure in this section describes logging in to the Layer 2 Switching processor when you have
a direct serial connection to the G700 Console port.
Maintenance Procedures
December 2003
Function
Key Function
F1 Cancel
F2
F3 Execute
F4
F5 Help
F6
F7 Next Page
F8 Previous
Page
Access and login procedures
Login methods
71