Avaya MCC1 Maintenance Procedures page 68

Access and login procedures
Laptop settings and connections
To use Windows for PPP modem connection (Windows 2000 or XP)
1 Return to the Network and Dial-up Connections window and right-click the connection you just
created.
2 Select Connect .
3 Leave the User Name, Password, and Domain fields blank. If the Dial field is blank, enter the
appropriate telephone number.
4 Click the Dial button. When the media server's modem answers, the system displays the After
Dial Terminal window.
5 Log on to the LAN.
a Enter your remote access login name and password.
b When the Start PPP Now! message appears, click Done .
The system displays a small double-computer icon in the lower right portion of your
screen.
6 Double-click the double-computer icon.
The system displays the connection's Dialup Status box.
7 Click on the Details tab.
8 Note the Server IP address.
9 Open a telnet session to the S8300:
Type telnet <ip-address> , where <ip-address> is the IP address of the S8300 as
noted in the Dialup Status box from Step 8.
10 Access SAT or use the CLI commands as needed.
Use Avaya Terminal Emulator for LAN
connection to Communication Manager
You can download the Avaya Terminal Emulator from the main menu for the Avaya Integrated
Management. Simply click Download next to the Administration menu item and follow the instructions.
Once the Terminal Emulator is installed on your PC, use the following steps to establish a LAN
connection to your Media Server.
To establish a LAN connection to the Media Server
1 Double-click the Terminal Emulator icon on your desktop. Alternatively, go to the Start menu,
select Programs, then select Avaya, and finally select Terminal Emulator.
The system displays the Terminal Emulator.
2 From the menu bar across the top of the screen, select Phones, then select Connection List.
The system displays the Connections window.
3 From the menu bar across the top, select Connection, then select New Connection.
The system displays the Connection Settings window.
4 Put in a name for the connection. Usually, this will be the name of your Media Server.
5 In the Host window, click Telnet.
6 Click the Emulation tab at the top.
The system displays the Emulation tab.
68 Maintenance Procedures
December 2003