Replacing Avaya Expansion Modules - Avaya MCC1 Maintenance Procedures

7 Lock the Media Module into the chassis by tightening the spring-loaded captive screws on the
front of the module.
8 Plug in the cables in the correct order.
!
To prevent access to electrical hazards by unauthorized personnel and to ensure continued
compliance to international radiated emissions requirements, all captive screws must be securely
tightened such that they cannot be loosened without the use of a tool.
Figure 84: Inserting Media Modules
AL
M
TS
T
AC
O K T
RE TO
M O
VE
SH
UT
DO
W N
SE
RV
IC ES
US
B 1

Replacing Avaya Expansion Modules

The Avaya Expansion Modules provide vastly increased networking and connectivity capabilities. For a
complete description of the Avaya Expansion Modules, see Avaya P330 Manager User Guide. These
modules may be mounted in the G700 in the Expansion Module slot on the left side of the faceplate. The
G700 must be powered off before you insert or remove an Avaya Expansion Module.
!
The G700 must not be operated with any slot open; empty slots must be covered with the supplied
blank plates.
CAUTION:
The G700 must be powered off before you insert or remove an Avaya Expansion Module.
Replacing an Expansion Module in the G700
1 Power off the unit if the equipment has been in operation.
2 Identify and mark all cables.
3 Undo the cables.
4 Remove the blank plate covering the slot.
Maintenance Procedures
December 2003
WARNING:
1
US
B 2
WARNING:
Component replacement
S8300 and G700 component maintenance
indc1in KLC 022802
301