Avaya MCC1 Maintenance Procedures page 70

Access and login procedures
Laptop settings and connections
11 In the TCP/IP port number field, leave 23 if you want to log in at the Linux command line. Type
5023 if you want to log in directly to the Communication Manager SAT command line.
In the Modem field, use the dragdown box to select the type of modem that your PC uses.
12
13 In the Serial port field, select the COM port you are using for your modem connection.
14 In the Baud rate field, select 9500 from the dragdown box.
15 Click the Dial Numbers tab.
The system displays the Display Numbers tab.
16 Type the phone number of the Media Server, as appropriate. Enter 1 in the Country Code field
for long-distance.
17 Click OK.
18 On the Connections window, double-click the name of the connection you just set up.
The PC dials up the Media Server, and when connected, the login prompt for Communication
Manager software appears.
19 Log in to Communication Manager to access the SAT command prompt screen.
If you are logging in as craft, you log in to the S8300 Linux software. Refer to
Communication Manager (SAT screens)
Terminal emulation function keys
When you log in to the Communication Manager SAT screens, your terminal emulation may not display
function keys on the screen to help you determine which function keys to press. Use
terminal emulation function keys,
Table 31: ntt terminal emulation function keys
Key sequence
ESC (alpha O) P
ESC (alpha O) Q
ESC (alpha O) R
ESC (alpha O) S
ESC (alpha O) T
ESC (alpha O) U
ESC (alpha O) V
ESC (alpha O) W
Table 32, w2ktt terminal emulation function keys,
emulation.
70
on page 76.
on page 70 as a guide for ntt terminal emulation.
Function key Function
F1 Cancel
F2
F3 Execute
F4
F5 Help
F6 Go to Page "N"
F7 Next Page
F8 Previous Page
on page 71 lists key presses for w2ktt terminal
Logging in to
Table 31, ntt
Maintenance Procedures
December 2003