Avaya MCC1 Maintenance Procedures page 380

Additional maintenance procedures
Call Admission Control-Bandwidth Limitation
Figure 112: status ip-network-region <n>
status ip-network-region 2
Src Dst Conn
Rgn Rgn Type
2 1 direct
2 3 indirect pass
2 4 indirect pass
2 5 indirect pass
For more details on the indirect regions, the second form of the command must be used (See
status ip-network-region 2/3,
<n/m> , shows all the bandwidth being used between regions <2> and <3> , which, in this case, includes
all the intermediate regions because region <2> and region <3> are indirectly connected.
Figure 113: status ip-network-region 2/3
Src Dst Conn
Rgn Rgn Type
2 1 direct
1 3 direct
Field descriptions
Field
Src Rgn
Dst Rgn
Conn Type
Conn Stat
BW-limits
BW-Used (Kbits) Tx
BW-Used (Kbits) Rx
#-of-Connections Tx
#-of-Connections Rx
Denials Today
380
Inter Network Region Bandwidth Status
Conn BW-limits BW-Used (Kbits)
Stat
pass 128 Kbits
on page 380). This command option, status ip-network-region
Inter Network Region Bandwidth Status
Conn BW-limits BW-Used (Kbits)
Stat
pass 128 Kbits
pass 256 Kbits
Description
Source region
Destination region
Connection type (direct or indirect)
Connection status (pass or fail)
Bandwidth and limits (as administered on the change ip-network-region
form)
Transmit bandwidth used (for direct connections only)
Receive bandwidth used (for direct connections only)
Transmit connection count (for direct connections only)
Receive connection count (for direct connections only)
Daily denial count (for direct connections only)
Note: This log is cleared at midnight - server time
#-of-Connections
Tx Rx Tx
0 0 0
#-of-Connections
Tx Rx Tx
0 0 0
0 0 0
Maintenance Procedures
Denials
Rx Today
0 0
Figure 113,
Denials
Rx Today
0 0
0 0
December 2003