Avaya MCC1 Maintenance Procedures page 217

To initiate an outgoing ISDN-PRI test call with the asynchronous method, issue the start command listed
above, which enables you to specify a specific the trunk on which to originate the ISDN-PRI test call. An
optional qualifier can be used that specifies in minutes (1 to 120) the duration of the test call. If no
duration is specified, the default is either 8.4 or 9.6 seconds.
Figure 65, Test ISDN-TestCall Response,
command:
Figure 65: Test ISDN-TestCall Response
The displayed fields have the following meanings:
Port
Maint. Name
Test Number
Test
Results
Error Code
The functions of the clear, list, and status commands associated with the ISDN Testcall are summarized
in Troubleshooting the outgoing ISDN-testcall command
• clear isdn-testcall: Enables you to cancel an in-progress ISDN-PRI test call and allow another
test call to start.
• list isdn-testcall: Enables you to list every ISDN-PRI trunk in use for an ISDN-PRI test call in
the system.
• status isdn-testcall: Enables you to check the progress of an outgoing test call. When an
outgoing ISDN-PRI test call completes in a specific PN, another ISDN-PRI trunk from the same
PN is available for testing (regardless of whether the status information has been displayed).
Maintenance Procedures
December 2003
on page 217 shows a typical response to the test isdn-testcall
test isdn-testcall
Port Maintenance Name
1B1501 ISDN-TRK
The port address (UUCSSpp) is the port network's number, carrier
designation, slot, and circuit of the maintenance object (MO) under test.
The type of MO tested.
The actual test that was run.
Indicates whether the test passes, fails, or aborts.
Additional information about the results of the test. See the ISDN-TRK section
in Maintenance Alarms Reference (555-245-102) for details.
Troubleshooting ISDN-PRI test calls
Test Number Test Result
258 PASS
on page 218.
Troubleshooting
Error Code
217