Table 96: Measurement capability by TTL type
Test
Loss at 1004 Hz Far
End to Near End
Loss at 1004 Hz Near
End to Far End
Loss at 404 Hz Far
End to Near End
Loss at 404 Hz Near
End to Far End
Loss at 2804 Hz Far
End to Near End
Loss at 2804 Hz Near
End to Far End
C-Message Noise Near
End
C-Message Noise Far
End
C-Notched Noise Near
End
C-Notched Noise Far
End
1
Return Loss
Near End
Return Loss Far End
1 Return Loss includes Echo Return Loss and both high-frequency and low-frequency Singing Return Loss.
Test call results
•
If the test call successfully completes, and every trunk tests within administered thresholds for
marginal and unacceptable performance, then a PASS result is returned.
•
If the test aborts or fails, an error code indicating the cause is returned. The error codes are
explained in the CO-TRK and TIE-TRK sections of
Maintenance Alarms Reference (555-245-102).
•
When the trunk is being used for call processing, the test aborts.
•
When the trunk is already being tested by maintenance software, the test is queued and run when
the maintenance activity finishes.
Maintenance Procedures
December 2003
Terminating Test Line Type
105 Type
105 Type
with
without
Return
Return
Loss
Loss
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Additional maintenance procedures
Automatic Transmission Measurement System
High-Level/
Low-Level
Tone
100
Source
Type
x
x
x
x
x
x
x
x
ABRI-PORT (ASAI ISDN-BRI Port)
102
Type
x
in
401