VIPA System MICRO
4.15
Deployment storage media - VSD, VSC
Overview
HB400 | CPU | M13-CCF0000 | en | 16-47
5.
Turn power OFF and ON.
After a firmware update of the CPU you always should execute a factory
reset.
At the front of the CPU there is a slot for storage media. Here the following storage media
can be plugged:
VSD - VIPA SD-Card
n
–
External memory card for programs and firmware.
n
VSC - VIPASetCard
–
External memory card (VSD) for programs and firmware with the possibility to
unlock optional functions like work memory and field bus interfaces.
–
These functions can be purchased separately.
–
To activate the corresponding card is to be installed and a Overall reset is to be
established.
Ä Chapter 4.12 'Overall reset' on page 75
A list of the currently available VSD respectively VSC can be found at
www.vipa.com
You can cause the CPU to load a project automatically respectively to execute a com-
mand file by means of pre-defined file names.
Deployment CPU M13-CCF0000
Deployment storage media - VSD, VSC
79