Counter - Additional Functions - YASKAWA VIPA System MICRO M13-CCF0000 Manual

VIPA System MICRO

5.6.6 Counter - Additional functions

5.6.6.1 Overview
Schematic structure
5.6.6.2 Gate function
Function
Gate function abort and
interrupt
HB400 | CPU | M13-CCF0000 | en | 16-47
The illustration shows how the additional functions influence the counting behavior. The
following pages describe these additional functions in detail:
Starting, stopping and interrupting a count function of counter 0 to counter 2 exclu-
n
sively happens via the SW gate by setting the SW gate of SFB 47.
n Starting, stopping and interrupting a count function of counter 3 happens via the
internal gate (I gate). The i gate is the result of logic operation of HW gate and SW
gate. The HW gate evaluation of the connection 'Gate 3' may be deactivated by the
parametrization. With a de-activated HW gate evaluation the triggering exclusively
happens by setting the SW gate of SFB 47.
The parametrization defines if the gate interrupts or aborts the counter process.
n At abort function the counter starts counting with the load value after gate restart.
Deployment I/O periphery
Counting > Counter - Additional functions
111