Karl Storz AUTCON III 400 Instruction Manual page 229

223
EMV
Guidance and manufacturer's declaration – electromagnetic emissions (IEC 60601-1-2, Table 1)
AUTOCON ® III 400 is intended for use in the electromagnetic environment specified below. The customer or user of the AUTOCON
that it is used in such an environment.
Interference emissions measurements
HF emissions acc. to CISPR 11
HF emissions acc. to CISPR 11
Harmonic emissions acc. to IEC 61000-3-2
Voltage fluctuations/flicker emissions acc. to
IEC 61000-3-3
EMC
Compliance
Group 2
Class B
Class A
Complies
CEM
® III 400 must make sure
Electromagnetic environment – guidelines
The AUTOCON ® III 400 must emit electromagnetic
energy in order to perform its intended function.
Nearby electronic devices may be affected.
The AUTOCON ® III 400 is suitable for use in all
establishments including domestic establishments
and those directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.