Documentation Conventions - Lucent Technologies Stinger Compact Remote Getting Started Manual

Atm dslam
Table of Contents

Advertisement

About This Guide
Some understanding of the following technologies may also be helpful:
IP networking
ATM networking
DSL technologies and protocols
Warning
safety instructions in the Edge Access and Broadband Access Safety and Compliance Guide.
For information specific to your unit, see Appendix D, "Safety-Related Electrical,
Physical, and Environmental Information," in this guide.
The procedures in this guide require you to understand and follow the safety
practices at your site, as well as those identified in this guide. Before installing any
hardware, check the installation location for adequate temperature, humidity, and
electrical requirements. Work closely with the network manager and other systems
integration personnel to ensure a functional installation.

Documentation conventions

Following are all the special characters and typographical conventions used in this
manual:
Convention
Monospace text
Boldface
monospace text
Italics
[ ]
|
>
Key1+Key2
xvi
Before installing your Stinger Compact Remote unit, be sure to read the
Meaning
Represents text that appears on your computer's screen, or that
could appear on your computer's screen.
Represents characters that you enter exactly as shown (unless
the characters are also in italics—see Italics, below). If you
could enter the characters but are not specifically instructed to,
they do not appear in boldface.
Represent variable information. Do not enter the words
themselves in the command. Enter the information they
represent. In ordinary text, italics are used for titles of
publications, for some terms that would otherwise be in
quotation marks, and to show emphasis.
Square brackets indicate an optional argument you might add
to a command. To include such an argument, type only the
information inside the brackets. Do not type the brackets unless
they appear in boldface.
Separates command choices that are mutually exclusive.
Points to the next level in the path to a parameter or menu
item. The item that follows the angle bracket is one of the
options that appear when you select the item that precedes the
angle bracket.
Represents a combination keystroke. To enter a combination
keystroke, press the first key and hold it down while you press
one or more other keys. Release all the keys at the same time.
(For example, Ctrl+H means hold down the Ctrl key and press
the H key.)
The Stinger® Compact Remote ATM DSLAM Getting Started Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stinger Compact Remote and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents