Monitoring The Status Of Remote Shelves; Using The Remote-Shelf-Stat Profile - Lucent Technologies Stinger Compact Remote Getting Started Manual

Monitoring the status of remote shelves

The remote-shelf-stat profile resides on the host for monitoring remote shelves.
The remoteshelf command displays information about enabled remote shelves in the
hosted system.
You can also set alarms and traps to notify an SNMP management station when
certain conditions occur on a remote shelf.

Using the remote-shelf-stat profile

When the host detects an enabled remote shelf, the system creates a
remote-shelf-stat profile for the shelf. For example:
HOST> dir remote-shelf-stat
0 08/27/2003 16:11:22 shelf-2
0 08/27/2003 16:17:39 shelf-3
0 08/27/2003 16:13:33 shelf-4
As with other stat profiles, the remote-shelf-stat profile is read-only, and
maintains dynamic state information regarding the remote shelf. It is accessible by
SNMP managers. Following are the read-only fields in a profile for shelf 3:
[in REMOTE-SHELF-STAT/shelf-3]
remote-shelf-id* = shelf-3
host-port = { { shelf-1 slot-1 3 } 0 }
remote-shelf-oper-state = remote-shelf-oper-state-up
name = Z0WISAAASCR
location = ZoowieIsland-Saskatchewan
internal-fan-unit-failed = no
external-fan-unit-failed = no
door-open = no
over-temperature = no
contact-closure = [ no no no no no no no ]
validation-status = { no 0 0 }
[in REMOTE-SHELF-STAT/shelf-3:host-port]
physical-address = { any-shelf any-slot 0 }
logical-item = 0
[in REMOTE-SHELF-STAT/shelf-3:contact-closure]
contact-closure[1] = no
contact-closure[2] = no
contact-closure[3] = no
contact-closure[4] = no
contact-closure[5] = no
contact-closure[6] = no
contact-closure[7] = no
[in REMOTE-SHELF-STAT/shelf-3:validation-status]
id-valid = no
validation-id-setting = 0
validation-id = 0
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Hosted System Management
Monitoring the status of remote shelves
6-5