Enclosure and Component Installation
Stinger CR enclosure Mounting hardware
Figure 3-1.
Enclosure mounting tab
Cabinet mounting hardware
The Stinger Compact Remote can be side-mounted or rear-mounted to a wiring
cabinet. It is side-mounted with the integrated mounting brackets on the enclosure
shown in Figure 3-2. A cable cover for this installation is provided with kit
#300716727.
Note
The is a ventilation fan on the left side of the enclosure. When possible, mount
right side of enclosure to left side of a wiring cabinet. This provides better access to
the ventilation fan for service.
Kit 300716750 provides the rear mount hanger bracket, rear mount bracket, and
cable cover for rear-mounting the enclosure to an wiring cabinet.
Note
Kit 300716743 is available for customers using a JWI cabinet. It also includes a
cable cover extension for rear-mounting the enclosure to a this type of cabinet. The
hardware provided by these kits is illustrated in Figure 3-3.
3-4
Pole mounting hardware
Rear mount hanger bracket
(only with kit 300715547)
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Pole mounting brackets
Rear mount
bracket
(only with kit
300715547)
Cable cover
Need help?
Do you have a question about the Stinger Compact Remote and is the answer not in the manual?