Using The Remoteshelf Command - Lucent Technologies Stinger Compact Remote Getting Started Manual

Atm dslam
Table of Contents

Advertisement

Parameter

Using the remoteshelf command

A new remoteshelf command displays information about enabled remote shelves. It
uses the following syntax on a hosted system:
HOST> help remoteshelf
usage: remoteShelf -[s|o] <param>
remoteShelf with no options, show all configured remote shelves
remoteShelf -s <shelf> show detailed information for a single remote shelf
remoteShelf -o <slot> show all remote shelves associated with a given OLIM
slot
For example, the following command shows details about remote shelf 2:
HOST> remoteshelf -s 2
Shelf:
Shelf Name:
Shelf Location: ZoowieIsland-Saskatchewan
Shelf Type:
Host Port:
Admin State:
Oper State:
Up Count:
Last Up Time:
Last down Time: Tue Sep 16 10:08:45 2003
If you specify a nonexistent shelf number, the host returns the information that the
shelf does not exist in the hosted system. For example:
HOST> remoteshelf -s 5
Remote shelf 5 does NOT exist!
The following command shows which shelves are connected to an OLIM in slot 5:
HOST> remoteshelf -o 5
Shelf Name
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Setting
id-valid
Indicates whether the validation-id setting in the
remote-shelf-config profile matches the validation ID
specified by the remote shelf's DIP-switch setting.
The disabled value indicates that no validation was
performed. A true setting indicates that validation was
done, and the software validation ID setting matched
the DIP switch setting. A false setting indicates that
validation was done, and the software validation ID
setting did not match the DIP switch setting.
validation-id-
The physical validation ID set by DIP switches on the
setting
remote shelf (from 0 to 255). This value is read from
the remote shelf.
validation-id
The validation ID specified in the remote-shelf-config
profile. This value is compared against the validation-
id-setting from the remote shelf to determine the
validation result, which is shown in the id-valid field.
2
Z0WISAAASCR
3 slot Compact Remote
{{ 1 5 2 } 0 }
Enabled
OPER_Down
0
Tue Sep 16 10:08:51 2003
AdminState OperState host-port
Hosted System Management
Monitoring the status of remote shelves
up-count
6-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stinger Compact Remote and is the answer not in the manual?

Table of Contents