Figure 2-8.
48-port ADSL2+ LIM
The 48-port full power ADSL2+ LIM (STGRCR-LIM-AP-48) has been designed to
meet the power and heat specifications of the Stinger CR unit. These LIMs support
end-user connections to the Stinger CR ATM DSLAM unit for stand-alone and hosted
operations. Support for ADSL2+ requires installation of Lucent Technologies license
for ADSL2+ capability on the unit.
Note
Detailed physical and configuration information for the 48-port ADSL2+ LIM
is included in the Stinger ADSL Annex A Line Interface Module (LIM) Guide for LIMs with
ADSL2+ Capability.
SHDSL 48-Port LIM
The 48-port SHDSL LIM (STGRRT-LIM-SL-48) has been designed to meet the power
and heat specifications of the Stinger CR ATM DSLAM unit. This LIM supports
end-user connections to the Stinger CR ATM DSLAM unit for stand-alone operations
with T1/IMA.
Note
Detailed physical and configuration information for the 48-port SHDSL LIM is
included in the Stinger SHDSL 48-Port and 72-Port Line Interface Module (LIM) Guide.
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
The 48-port low-power LIM
Preparing to Install the Unit
Checking modules and chassis
1
4
7
10
13
16
19
22
25
28
31
34
37
40
43
46
2-13
Need help?
Do you have a question about the Stinger Compact Remote and is the answer not in the manual?