Barco Event Master E2 Lite User Manual page 41

Image 4-7: Tri-Combo Input Card Rear Panel
1 DP connector — with an LED that turns on green when a valid sync has been detected
2 HDMI connector — with an LED that turns on green when a valid sync has been detected
3 BNC connector — SDI 1 with an LED that turns on green when a valid sync has been detected
4 BNC connector — SDI 2 with an LED that turns on green when a valid sync has been detected
5 BNC connector — SDI 3 with an LED that turns on green when a valid sync has been detected
6 BNC connector — SDI 4 with an LED that turns on green when a valid sync has been detected
Features
• Provides up to six (6) independent signals
• One channel of DisplayPort video on a full-size DisplayPort connector.
• One channel of HDMI video on a Type A connector.
• Process up to four independent SDI signals with support for SD, HD, 3G, 6G and 12G in Single Link, Dual
Link (1.5G) or Quad Link (3G)
• Each input channel includes an LED that turns green when a valid sync is detected.
Specifications
DisplayPort
• DisplayPort per 1.2 specification
• Pixel clock up to 620 MHz
- Max pixel clock at 24 bits/pixel = 620 Mpix/sec
- Max pixel clock at 30 bits/pixel = 576 Mpix/sec
- Max pixel clock at 36 bits/pixel = 480 Mpix/sec
• Supported formats
- formats up to 4096x2160@60 (30 bits)
- 4K/UHD Supported:
◦
3840x2,400/ 50/59.94/60 via 1x DP
◦
4096x2,160/ 50/59.94/60 via 1x DP
◦
3840x2,160/ 50/59.94/60 via 1x DP
• Supply up to 500 mA @ 3.3V on pin 20
- Allows the DP connector to power an external device
- Overcurrent protection provided by means of a re-settable fuse
Hardware orientation
R5909934 /00 E2 Lite and EC-40 41