Barco Event Master E2 Lite User Manual page 266

E2 Lite Maintenance
Concerned parts
R767269K Cable Kit Set
Necessary tools
• 1 x Phillips Screwdriver #2
• Hex Screwdriver
How to remove the VFD Cable
1. Partially remove the front panel assembly and pull it away to expose the cables behind it (refer to the related
procedure).
2. Push out the side latches on VFD connector to release the VFD cable.
Image 13-73
3. Gently push the cable through the grommet located in the 1RU tray.
266 R5909934 /00 E2 Lite and EC-40