Servicing - Barco Event Master E2 Lite User Manual

EC-40 Maintenance

14.1 Servicing

General
Given the low failure rate experienced on this device, it is extremely rare to have to change parts on the EC-40
controller.
In the unlikely event your EC series controller requires service, please refer to the Return Material
Authorization section in this manual prior to sending the unit back to the Barco Service Department.
The only parts that the user may have to change by itself is the work light and power fuse. The work light is a
spare part provided by Barco (see spare parts list bellow). The fuse is not provided by Barco.
EC-40 Overview
Orientation and main components.
Front:
Image 14-1: EC-40 controller
1 Work light
2
Touchscreen
3
White show-script light
Rear:
286 R5909934 /00 E2 Lite and EC-40
4 User-assignable presentation buttons
5
T-bar