Barco Event Master E2 Lite User Manual page 166

EM GUI orientation
Diagnostic subtab
Controller tab: Diagnostic subtab
Description of the Devices tab of the Resources area
The Devices tab lists E2 Light processors that are connected to the system.
166 R5909934 /00 E2 Lite and EC-40
This panel displays test controls for each detected
controller.
• LED Test:
- Test Off: LEDs are returned to normal behavior.
- All Blue/Red: Turns on all blue and red LEDs;
other LEDs are turned off.
- All Green: Turns on all green LEDs; other LEDs
are turned off.
• LCD Pixel Test:
- Test Off: LCD text is returned to normal
behavior.
- All: All LCD displays are filled (all 256 bits are
enabled).
• LCD Backlight Test:
- Test Off: LCD colors are returned to normal
behavior.
- Red: Only LCD red color is turned on.
- Green: Only LCD green color is turned on.
- Blue: Only LCD blue color is turned on.
- All: LCD red, green, and blue colors are all
turned on.
• Button Test:
- Checkbox checked: The test is on.
When the test is on, do not trigger the behavior
of the button. For example, if a button is
mapped to a Preset, do not recall that Preset.
- Button Scan Code: Pressing a button on the
controller shows the button number returned by
the API (in place of the "NA").
• T-Bar Test:
- Checkbox checked: The test is on.
- T-Bar Value: Moving the T-Bar shows the
number returned by the API as the T-Bar
changes positions.
• Adjustment Wheel Test:
- Checkbox checked: The test is on.
- When the test is on, rotating the wheel shows
the number returned by the API.