General Considerations; Important Safety Instructions - Barco Event Master E2 Lite User Manual

Safety

2.1 General considerations

General safety instructions
• Before operating these devices please read this manual thoroughly and retain it for future reference.
• All warnings in the documentation manual should be adhered to.
• All instructions for operating and use of these devices must be followed precisely.
• All local installation codes should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1,
EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information
technology equipment including electrical business equipment. These safety standards impose important
requirements on the use of safety critical components, materials and insulation, in order to protect the user or
operator against risk of electric shock and energy hazard and having access to live parts. Safety standards
also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and
strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing
ensures the safety of the equipment to the user even when the equipment's normal operation fails.
Certificates
Image 2-1: CE mark
These products comply with the essential requirements of Council Directives 2004/108/EC or 2014/30/EU
(EMC), 2006/95/EC or 2014/35/EU (LVD) and 2011/65/EU (RoHS).
Image 2-2: EAC mark
This product complies with the Safety of Low-Voltage Equipment (LVE Technical Regulation 004/2011, CU TR
004/2011) and the Electromagnetic Compatibility of Technical Products (EMC Technical Regulation, CU TR
020/2011).

2.2 Important safety instructions

To prevent risk, personal injury and Event Master devices damages
Please read this chapter carefully. It includes several cautions to prevent damage to Event Master devices.
Ensure that you understand and follow all safety guidelines, safety instructions and warnings mentioned in this
chapter before installing Event Master devices. After this chapter, additional "warnings" and "cautions" are
given depending on the installation procedure. Read and follow these "warnings" and "cautions" as well.
• Read and follow all installation and operation instructions.
• Only trained technicians may install Event Master devices.
• Installation of Event Master devices must be done in a dust free area.
• Only use attachments/accessories specified by the manufacturer.
• CAUTION: Troubleshooting must be performed by a trained technician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
• Refer all servicing to qualified service personnel. Servicing is required when the system has been
damaged in any way, such as liquid has been spilled or objects have fallen into the system, or the system
has been exposed to rain or moisture, does not operate normally, or has been dropped.
• FRAGILE: Event Master devices are fragile. Handle these devices with care at all times.
• To prevent injury, minimum 2 persons are required to carry an Event Master E2 Lite processor.
16 R5909934 /00 E2 Lite and EC-40