Installation Requirements - Barco Event Master E2 Lite User Manual

General
Image 3-3
A word about Destinations
Destination is a location where the user assigns the outputs.
We can consider three destination types:
• Single/Multiple Screen Destination (e.g. one or more projectors)
• AUX Destination (e.g. a monitor dedicated for camera adjustments)
There are several rules that apply when defining an Destination configuration. For details on destination setup
procedures, please refer to the section "Configuration Menu > Adjustment > Destination Configuration", page
97.

3.7 Installation requirements

Environmental conditions
Table below summarizes the physical environment in which the Event Master E2 Lite video processor and EC-
40 controller can be operated or stored.
Environment
Ambient Temperature
Air cleanliness
Humidity
Altitude
CAUTION: Let the Event Master devices and their controllers acclimate to the ambient temperature
after unpacking. Ensure that the humidity is within the specification. Neglecting this may result in
startup failure of these devices.
Software package
Verify that the Event Master device is loaded with the latest software version available on the Barco
web site (URL:https://www.barco.com/). Refer to the chapter "Updating firmware", page 195 for
more information about the device upgrading software.
1: For PRC (People's Republic of China) the certified altitude is specified on the product label.
28 R5909934 /00 E2 Lite and EC-40
Operating
0°C (32°F) to 40°C (104°F)
Clean office environment (equivalent with
cleanroom standard ISO 14644-1 ISO Class
9)
5% to 85% RH Non-condensed
-60 (-197Ft) to 3000m (9843Ft)
Non-Operating
-10°C (14°F) to 60°C (140°F)
n.a.
0% to 95% RH Non-Condensed
1 -60 (-197Ft) to 10000m (32810Ft)