Barco Event Master E2 Lite User Manual page 198

Updating firmware
How to upgrading firmware
1. Verify that the Event Master series processor has internet access. Contact your system administrator if
necessary.
2. Select Setup > Firmware Upgrade > Web Upgrade. The submenu shown in the following illustration
appears.
Image 8-4: Web Firmware Upgrade Submenu
3. Select Check.
A message informs you if a new firmware version is available.
Image 8-5: Firmware Version-Upgrade Message
or
If during the "Check" process new firmware is NOT detected, the following message will show:
Image 8-6: No Firmware Available Message
4. Press SEL to start the upgrade. A message will inform the user to "Please wait..."
Image 8-7: Upgrade Wait Message
5. After the upgrade is finished, the unit will automatically reboot.
Image 8-8: Resetting Message
If you are not connected to the internet, a message prompts you to check the connection.
198 R5909934 /00 E2 Lite and EC-40