Event Master E2 Lite Processors Features - Barco Event Master E2 Lite User Manual

suitable for most control environments, while simultaneously packing all the power and durability needed for
instant access to crucial functions. The EC-40 brings sources, presets, layers, and destination selection to
your fingertips, along with a touch-enabled display.

3.2 Event Master E2 Lite processors features

Inputs
The E2 Lite video processor accommodates up to eight (8) Event Master input cards.
Card type
HDMI/DisplayPort input card
Dual Link DVI input card
Tri-Combo input card
Genlock input
The Event Master E2 Lite video processor ships with the following seven (7) input cards:
• 26 inputs:
- 8x HDMI 1.4 (297 Mpix/sec max)
- 8x DisplayPort 1.1 (300 Mpix/sec max)
- 4x Dual Link DVI (330 Mpix/sec max)
- 1x DisplayPort 1.2 (620 Mpix/sec max)
- 4x SD/HD/12G SDI
- 1x HDMI 2.0 (on the Tri-Combo Input card)
Each input card slot supports one 4K/UHD signal. The right-most input slot supports two 4K/UHD
signals (with the second generation Tri-Combo Input card).
The Event Master input cards that ship with the E2 Lite are programmed to work specifically with the
E2 Lite. E2 Lite input cards will not work in any other Event Master chassis. Full function Event
Master cards will work in the E2 Lite. This includes link cards, input cards, and output cards.
Outputs
The E2 Lite video processor accommodates three (3) Event Master output cards and one (1) output card
designated as a Multiviewer (MVR). The last slot on the E2 Lite (Slot #14) may be designated as either a
Multiviewer (MVR) card slot or as an Output card slot. See "Configuration Menu > Adjustment > Unit
Configuration", page 79 for more details.
Card type
HDMI output card
HDMI Multi-viewer card
The Event Master E2 Lite video processor ships with the following output cards:
• 16x HDMI outputs via 4 Event Master series output cards:
- HDMI 1.4a specification
- HDCP 1.4 and EDID 1.3
- Each output card supports up to 1920x1200@60p out
The Event Master output cards that ship with the E2 Lite are programmed to work specifically with
the E2 Lite. E2 Lite output cards will not work in any other Event Master chassis. Full function Event
Master cards will work in the E2 Lite. This includes link cards, input cards, and output cards.
Connector Type
2x HDMI 1.4 connectors
2x DisplayPort 1.1 connectors
2x Dual Link DVI-D connectors
1x DP 1.2 connector
1x HDMI 2.0 connector
4x SDI BNC connectors supporting 12G SDI
2x BNC connector (Input and loop output)
Supports black burst* and tri-level analog signals
Connector Type
4x HDMI 1.4 connectors
4x HDMI 1.4 connectors
R5909934 /00
General
E2 Lite and EC-40 21