Barco Event Master E2 Lite User Manual page 132

EM GUI orientation
1 Moves the selected layer up in priority and swaps with the layer previously above.
2 Moves the selected layer to the top of the priority and swaps it with the layer previously on top.
3 Moves down in priority and swaps the z-order of the selected layer with the layer previously below.
4 Moves the selected layer to the bottom of the priority and swaps it with the layer previously at the
bottom.
Example:
Image 6-41
Only the visual priority (on Preview) of the two layers changes. The layers remain at their current
locations — only the priority changes.
Size and Position
Image 6-42: Size and Position adjustments
1 Full Screen Vertical takes the selected PIP(s) to full screen, using the source's height as the guide.
If borders are on, they will be taken into account so that they are visible.
2 Full Screen Horizontal takes the selected PIP(s) to full screen, using the source's width as the
guide. If borders are on, they will be taken into account.
3 Fill H/V will stretch the selected layer over the whole destination size not respecting the aspect of the
source.
132 R5909934 /00 E2 Lite and EC-40