Programming Menu > Drop Inputs To Aux Destinations; Programming Menu > Presets And User Keys - Barco Event Master E2 Lite User Manual

2. Adjust Mask of the layer. This has in the past been called crop.
(Optional) Adjust Layer Parameters > Layer Effects submenu
With the Layer Effects submenu you can:
1. Activate and Adjust Strobe effect for the layer.
2. Activate and Adjust Flip effect for the layer.
3. Activate Freeze effect for the layer. This also have a shortcut in the bottom of the workspace.
4. Activate and Adjust Color Effects for the layer.
5. Activate Monochrome effect for the layer.
6. Activate Invert effect for the layer.
If the Layers are supposed to toggle between Preview and Program, click the Toggle button in the
top of the Destinations Preview.
A source can be dropped into the Program of an Aux if the Program is Un-Locked. Un-lock the
Program by clicking on the small white lock in the bottom of the Destination.
7.22 Programming Menu > Drop Inputs to Aux
Destinations
General
In this procedure, you will drop Inputs into Aux Destinations.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to
chapter "Programming Menu", page 116.
Drop Layers into Screen Destinations
1. Make sure the Aux Destination is visible in the workspace by selecting the proper layout or view.
2. On the left hand side click on the Inputs tab.
3. Drag any Input Source into the preview screen of the Aux destination.
(Optional) Additional Adjustments
1. If the Aux is supposed to toggle between Preview and Program, click the Toggle button in the top of the
Destinations Preview
2. A source can be dropped into the Program of an Aux if the Program is Un-Locked. Un-lock the Program by
clicking on the small white lock in the bottom of the Destination.
7.23 Programming Menu > Presets And User Keys
General
In this procedure, you will drop sources and Layers into Screen Destinations & Sources into layers.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to
chapter "Programming Menu", page 116.
System Setup
R5909934 /00 E2 Lite and EC-40 191