Programming Menu > Adjustment Area > Global Transition Rate/Trans/Cut - Barco Event Master E2 Lite User Manual

Color adjustment
6.29 Programming Menu > Adjustment area >
Global Transition Rate/Trans/Cut
General
At the bottom of the adjustment panel, are the transition rate and type buttons. These actions are executed for
the selected Destinations.
Description
These controls are disabled if no Destination is selected.
Image 6-60: Destination Transition adjustments
All Trans button
• RGB Contrast and Brightness settings are
adjustable within a range of 0% to 200%. The
default setting for all of these properties is 100%.
• Gamma is adjustable within a range of 0.3 to 3.28.
The default setting is 1.0.
• Hue is adjustable within a range of -180 to +180
degrees. The default setting is 0 degrees.
• Saturation is adjustable within a range of 0% to
200%. The default setting is 0%.
• Reset All: Returns all values to their default
settings.
• Save Source would save the Source information
from the selected layer to the actual Source.
R5909934 /00
EM GUI orientation
E2 Lite and EC-40 151